How To Install The High Pressure Hose Connector Of Hydraulic Wrench Correctly?

 

As it needs a conversant skill to install the object, the workers must have enough experience to perfectly finish as well as protect themselves utterly from harm.

First of all, keep it in mind that every time you embark on this kind of works, read the notice at first.

 

1. The high-pressure hose of the hydraulic wrench should not be excessively bent or bent at the root when it is moving or stationary. It should be bent at least 1.5 times its diameter. If you are curious about the pressure, you can use the electronic pressure gauge to measure it so that you can know more about it.

 

2. When the high-pressure hose of the hydraulic wrench moves to the extreme position, it should not be too tight and should be relatively loose. Because pressure gauge snubber can not always control the highest pressure, workers should be careful enough to avoid emergencies.

 

3. The torsion deformation of the hose should be avoided as far as possible. Most hoses can not undertake undue deformation like wire braided rubber hose.

 

4. The high-pressure hose of the hydraulic wrench shall be kept away from the heat radiation components as far as possible as well as stainless steel hydraulic pipe, and the heat insulation board shall be installed when necessary.

 

5. External damage of the hose should be avoided, such as long-term friction on the surface of isomorphic parts in use. If a brass garden hose suffers from external damage, it means the hose can not work properly.

 

6. If the self-weight of the hose causes excessive deformation, there should be supporting parts.

 

Then, you should know ways to keep a hydraulic wrench in a good condition and enlarge its longevity. It is like the hydraulic rubber hose that needs careful upkeep to attain its best condition.

 

1. Attention should be paid to the hydraulic wrench in operation: change the hydraulic fluid frequently when using, and the working fluid of the hydraulic wrench must be anti-wear hydraulic oil. Never use alcohol, water, and other things as the working fluid of a hydraulic wrench. And antiwear hydraulic oil must be clean and pure hydraulic oil to be used by a hydraulic wrench. This can extend the service life of the wrench.

 

2. In order to prevent the working fluid of the hydraulic wrench from being polluted, it is better to replace the joint connecting the high-pressure oil pipe with the threaded joint in the hydraulic system, which can effectively prevent the contamination of the working fluid by pollutants.

 

3. When the hydraulic wrench works, pay attention to keep the surrounding working environment clean and tidy, and avoid the small oil and dirt dust entering the hydraulic wrench, which will affect the working performance and service life of the hydraulic wrench. And in most cases, we should take good care of the industrial hose crimping machines, too. Because the machine is precious and expensive.

 

4. For the hydraulic wrench which is not often used, attention should be paid to the dry storage environment, and can not be placed in a humid environment. In order to prevent rust on the surface, it is better to apply Vaseline evenly on the wrench surface before storage. Then put it in a matching box and store it in a dry and ventilated room.

 

Finally, why customers should choose Jazzy, one of the hydraulic rubber hose manufacturers, is that they are professional with  excellent industry experience more than 7 years as well as their teams. The quality of their products such as differential pressure gauge has passed assorted certificate testing systems. Certainly, jazzy always use the highest standards of raw material for example double wire hose clamp and the most advanced devices to produce.